Removing the module from the chassis – Rockwell Automation 1756-HYD02 ControlLogix Hydraulic Servo Module User Manual
Page 29
Advertising
Publication 1756-UM525A-EN-P - June 2003
29
Installing the 1756-HYD02 Module Chapter 2
Removing the Module
from the Chassis
Follow the steps below to remove the 1756-HYD02 module from the
ControlLogix chassis.
1.
Push in the top and bottom locking tabs.
2.
Pull module out of the chassis.
20856-M
Locking tabs
20857-M
Advertising