Troubleshooting the 1756-hyd02 module, What this chapter contains, Using the status indicators – Rockwell Automation 1756-HYD02 ControlLogix Hydraulic Servo Module User Manual
Page 77: Chapter 5, Chapter
Advertising
77
Publication 1756-UM525A-EN-P - June 2003
77
Chapter
5
Troubleshooting the 1756-HYD02 Module
What This Chapter Contains
This chapter describes how to troubleshoot the 1756-HYD02 module.
Using the Status Indicators
The ControlLogix Hydraulic Servo module uses a single bi-colored LED to
indicate module OK status and bi-colored LED indicators to show individual
feedback (FDBK) and drive (DRIVE) status for both axes.
During power-up, the module completes an indicator test. The OK indicator
turns red for 1 second and then turns to flashing green if the module passes all
its self tests.
The module’s status indicators are shown below.
For more information about:
See page:
Using RSLogix 5000 to Troubleshoot the
Module
43454
Advertising