Rockwell Automation 1756-HYD02 ControlLogix Hydraulic Servo Module - Manual (Page 85)

Publication 1756-UM525A-EN-P - June 2003 85
Specifications Appendix A
Radiated RF Immunity IEC 61000-4-3:
10V/m with 1kHz sine-wave 80%AM from 80MHz
to 2000MHz
10V/m with 200Hz 50% Pulse 100%AM at
900Mhz
EFT/B Immunity IEC 61000-4-4:
±2kV at 5kHz on signal ports
Surge Transient Immunity IEC 61000-4-5:
+2kV line-earth (CM) on shielded ports
Conducted RF Immunity IEC 61000-4-6:
10Vrms with 1kHz sine-wave 80%AM from 150kHz
to 80MHz
Enclosure Type Rating None (open-style)
Certifications
(when product is marked) UL UL Listed Industrial Control Equipment
CSA CSA Certified Process Control Equipment
CSA CSA Certified Process Control Equipment
for Class I, Division 2 Group A,B,C,D
Hazardous Locations
CE
(5)
European Union 89/336/EEC EMC
Directive, compliant with:
EN 50082-2; Industrial Immunity
EN 61326; Meas./Control/Lab.,
Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61000-6-4; Industrial Emissions
C-Tick
(4)
Australian Radiocommunications Act,
compliant with:
AS/NZS 2064; Industrial Emissions
(1) This specification represents the maximum LTD input resolution that the 1756-HYD02 module can accept. The
module does not require that you connect an LDT with this level of resolution.
(2) Maximum wire size requires the extended-depth RTB housing (1756-TBE).
(3) Use the conductor category information for planning conductor routing as described in the system level
installation manual.
(4) Refer to Industrial Automation Wiring and Grounding Guidelines, publication number 1770-4.1.
(5) See the Product Certification link at www.ab.com for Declarations of Conformity, Certificates, and other
certification details.