Define the properties of the scanner – Rockwell Automation 1794-OB16D FLEX I/O Diagnostic Modules User Manual User Manual
Page 53
Advertising
Publication 1794-UM061A-EN-P - July 2006
Configure FLEX I/O Digital Modules on a DeviceNet Network
51
Define the Properties of the Scanner
3. Choose Next.
4. Choose Browse and find the RSNetWorx configuration file
for the network (.dnt file). The default path for the file is
…\Program Files\Rockwell
Software\RSNetWorxII\Networks.
5. Choose Finish.
1. Specify the general properties
(name, slot, sizes, etc.).
2. Choose Next.
Advertising
This manual is related to the following products: