Rockwell Automation 1794-OB16D FLEX I/O Diagnostic Modules User Manual - Manual (Page 67)

Publication 1794-UM061A-EN-P - July 2006
Configure Your Adapter and Digital Modules on a ControlNet Network 65
Add Local and Remote
ControlNet Modules
Before you can connect to and control distributed I/O, you must add local and
remote ControlNet communication modules. The type of distributed I/O
determines your choice of a remote ControlNet adapter. Figure shows a brief
series of screens used when adding local and remote ControlNet
communication modules to an RSLogix 5000 project.
For more detailed information on how to add local and remote ControlNet
modules to your project, refer to publication
CNET-UM001 .
1. Add Local ControlNet Communication Module
2. Add Remote ControlNet Communication Module