Rockwell Automation 1794-OB16D FLEX I/O Diagnostic Modules User Manual User Manual
Page 94
Advertising
Publication 1794-UM061A-EN-P - July 2006
92 Configure your Digital Module on an EtherNet/IP Network
When you choose rack optimization for an I/O module, its tags are created as
aliases for the tags of the adapter module. In your logic, you see the tag of the
device as aliases for a tag of the adapter module. (The tag name of the adapter
is in angle brackets).
Example 1
Example 2
conveyor:2:I.0
<conveyor:I.Data[2].0>
tag name of the I/O device
tag name of the adapter
Advertising
This manual is related to the following products: