Rockwell Automation 1794-OB16D FLEX I/O Diagnostic Modules User Manual - Manual (Page 77)

Publication 1794-UM061A-EN-P - July 2006
Configure Your Adapter and Digital Modules on a ControlNet Network 75
25. Notice that all of the yellow warning triangles are gone in the I/O
Configuration once connections are scheduled..
26. Notice that the Status in the 1794-ACN15 Module Properties dialog is
Running with no faults.
Access Module Data via
the 1794-ACN15 Adapter
Use the following information to use the 1794 FLEX I/O ControlNet adapter
module data in the ladder logic program.
• ACN15 = the name you gave to your ControlNet adapter
• # = slot number of FLEX I/O module (0 to 7)
• C = configuration, I = input, O = output
When there is no slot number, that is the rack optimized data.
Here are some typical sample comfiguration data examples.
clear
of
faults