Commission the adapter – Rockwell Automation 2100-ENET CENTERLINE 2100 Motor Control Centers EtherNet/IP Network Adapter User Manual
Page 16
Advertising
![background image](/manuals/580622/16/background.png)
16
Rockwell Automation Publication 2100-UM006A-EN-P - July 2013
Chapter 2
Install the Adapter
After installing the adapter and applying power, refer to
for a
description of the status indicators.
Commission the Adapter
To commission the adapter, you must set a unique IP address on the network.
(Refer to the
for details about IP addresses.) After installing the adapter
and applying power, you can set the IP address by using a BOOTP server or by
setting adapter parameters. See
for details.
By default, the adapter is configured so that you must set the IP address by using a
BOOTP server. To set the IP address by using adapter parameters, you must
disable the BOOTP feature. See
for details.
Advertising