Rockwell Automation 2100-ENET CENTERLINE 2100 Motor Control Centers EtherNet/IP Network Adapter - Manual (Page 7)

Rockwell Automation Publication 2100-UM006A-EN-P - July 2013 7
Preface
• Screen shots in this manual were taken from the following software
packages. Your screen can appear slightly different if your version of the
software is not the same:
•
RSLinx software, version 2.51
• RSLogix 5 software, version 7.20
• RSLogix 500 software, version 7.20
• RSLogix 5000 software, version 19
Studio 5000 Environment The Studio 5000™ Engineering and Design Environment combines engineering
and design elements into a common environment. The first element in the Studio
5000 environment is the Logix Designer application. The Logix Designer
application is the rebranding of RSLogix 5000 software and will continue to be
the product to program Logix5000 controllers for discrete, process, batch,
motion, safety, and drive-based solutions.
The Studio 5000 environment is the foundation for the future of Rockwell
Automation® engineering design tools and capabilities. This environment is the
one place for design engineers to develop all of the elements of their control
system.