Rockwell Automation 2100-ENET CENTERLINE 2100 Motor Control Centers EtherNet/IP Network Adapter - Manual (Page 42)

42 Rockwell Automation Publication 2100-UM006A-EN-P - July 2013
Chapter 5 Using the I/O
ControlLogix Controller Image
In all instances of the E3 Plus Add-on Profile, the controller tags are predefined
in
Table 1 . In RSLogix 5000 software, version 16 or later, and the Classic Profile
for version 15, these controller tags are automatically created for you. However,
when using the Generic Profile (See
Using the RSLogix 5000 Generic Profile (all
versions) on page 35 ) in RSLogix 5000 software, these controller tags are not
descriptive or defined.
The following tables show how to configure the E3 Plus based on the settings
chosen in setting up the E3 Plus Add-on Profile in RSLogix 500 software.
Table 1
shows how the Input and Output Assemblies are configured in the E3 Plus.
Table 2 shows the general tag names for specific assemblies. These assemblies are
not changed from those reflected in the E3 Plus user manual. For more detailed
information on the tables below, reference E3 and E3 Plus Solid-State Overload
Relay User Manual, publication
193-UM002 .
Table 1: Input and Output Assembly Configuration for the E3 Plus per Connection Type
Connection Output
Assembly (59) Input Assembly
(60)
EC1 Connection
Parameter Based (Default) 103 100
Parameter Based 103 100
Status 103 106
Parameter via DataLink 110 111
EC2, EC3, EC4 Connection
Parameter Based (Default) 105 100
Parameter Based 105 100
DeviceLogix + Status 140 141
Parameter via DataLink 110 111
EC5 Connection
Parameter Based (Default) 105 100
Parameter Based 105 100
DeviceLogix + Status 140 142
Parameter via DataLink 110 111