Rockwell Automation 2100-ENET CENTERLINE 2100 Motor Control Centers EtherNet/IP Network Adapter - Manual (Page 20)

20 Rockwell Automation Publication 2100-UM006A-EN-P - July 2013
Chapter 3 Configure the Adapter
Fill in the IP address, host, and description.
5. Click OK.
6. Cycle power to the 2100-ENET adapter.
The newly assigned IP address appears in the Request History window.
TIP The IP address is the only required information.
TIP The end device’s DeviceNet address is configured for node 63 by following the
instructions provided in the appropriate end device user manual. The data rate
is configured for 500 Kpbs by following the instructions provided in the
appropriate end device user manual.