Add the bridge to the i/o configuration – Rockwell Automation 2100-ENET CENTERLINE 2100 Motor Control Centers EtherNet/IP Network Adapter User Manual
Page 27
Rockwell Automation Publication 2100-UM006A-EN-P - July 2013
27
Configure the I/O
Chapter 4
Figure 3: Example ControlLogix EtherNet/IP Network
Add the Bridge to the I/O Configuration
To establish communication between the controller and adapter over the
network, you must first add the ControlLogix controller and its bridge to the
I/O configuration. This procedure is similar for all RSLogix 5000 software
versions.
1.
Start RSLogix 5000 software.
2.
From the File menu, choose New.
The New Controller dialog box appears. (RSLogix 5000 software, version
20, is shown.)
Make the appropriate choices for the fields on the dialog box to match
your application and click OK.
IP Address 10.91.100.80 ControlLogix
Controller with 1756-ENBT Bridge
Computer with Ethernet
Connection
Ethernet Switch
2100-ENET Adapter