Rockwell Automation 2100-ENET CENTERLINE 2100 Motor Control Centers EtherNet/IP Network Adapter - Manual (Page 46)

46 Rockwell Automation Publication 2100-UM006A-EN-P - July 2013
Chapter 5 Using the I/O
Create Ladder Logic by Using the RSLogix 5000 Generic Profile (all
versions)
When you add the adapter and E3 Plus module to the I/O configuration
(
Chapter 4 ), RSLogix 5000 software automatically creates generic
(non-descriptive) controller tags for them. In this example program, the
following controller tags are used.
Figure 7: ControlLogix Controller Tags for E3 Plus Module Generic Profile Example Ladder Logic
Program
You can expand the Input and Output tags to reveal the input and output
configuration.
Figure 8: ControlLogix Input Image for Generic Profile Example Ladder Logic Program
Figure 9: ControlLogix Output Image for Generic Profile Example Ladder Logic Program