Rockwell Automation 2706-LSW DL40 PLUS OFFLINE PROG.SFTWR.USER MANUAL - Manual (Page 112)

6–5 Getting Reports
Publication 2706-6.2
Choose C onfigure Port from the Select File and press [
↵
] to identify
and configure the communication port to which your printer is
connected. A window appears listing the ports available to you.
Use the up and down arrow keys to select a port and press
[
↵
] .
Depending on which type of port you select, one of two windows
open. One window allows you to set communication parameters for
a COM port, and the other allows you to set the parameters for an
LPT port.
Configure Ports menus
COM Port
Configuration
LPT Port
Configuration
The parameters for LPT ports include:
Parameter Acceptable values
Null Count 0
Page Width 20 to 132
The parameters for COM ports include:
Parameter Acceptable values
Null Count 0
Page Width 20 to 132
Baud 110, 150, 300, 600, 1200, 2400, 4800,
9600
Parity None, Odd, Even
Data Bits 7 bits, 8 bits
Stop Bits 1 bit, 2 bits
Handshake None, Software, Hardware
After setting the printer port options, press [END] or use the down
arrow key to move to the last line of the window and highlight Quit.
Press
[
↵
] to close the Configure Port window and return to the
Select File menu.
Configure Ports Submenu