Rockwell Automation 2706-LSW DL40 PLUS OFFLINE PROG.SFTWR.USER MANUAL - Manual (Page 75)

4–33 Creating Message Files
Publication 2706-6.2
Notes
Refer to the previous section for descriptions of each message
attribute.
If Line Usage is other than All Lines, then the display line on the
DL40 does not necessarily correspond to the cursor row value shown
on the message editing window during editing.
To select a block of messages, move the cursor to the first message
on the block and press [CTRL][B
] to mark the beginning of the
block. Then move the cursor to the last message in the block and
press
[
↵
] . The entire block will be moved to the opposite column.
The Slave Message Color, Slave Message Length, and Echo Relay to
slave message attribute selections are only available through the
Offline Programming Software. You cannot change those attributes
with the DL40 Onboard
Editor.