Rockwell Automation 2706-LSW DL40 PLUS OFFLINE PROG.SFTWR.USER MANUAL - Manual (Page 45)

4–3 Creating Message Files
Publication 2706-6.2
Notes
From the Develop menu you can choose from the following:
•
Select File to modify an existing data file.
•
Create New File to create a new data file.
•
Directory to specify a data path
The Offline Programming Software supports both color and
monochrome monitors. Make sure your monitor type matches the
type selected in the Setup menu. Refer to Chapter 3 for instructions
on changing your monitor type.
You cannot Select a file unless that file is located on the current DOS
path. If necessary, use the Directory menu item to change
directories. The window that opens when you pick Develop
!Select
File shows the current directory in the upper left.