Rockwell Automation 2706-LSW DL40 PLUS OFFLINE PROG.SFTWR.USER MANUAL - Manual (Page 63)

4–21 Creating Message Files
Publication 2706-6.2
Use the following special keys on this screen.
← → Moves the Message Select cursor to the Message Selections or Message
Picks column
↑ ↓
Moves the Message Select cursor up or down within a column
↵
Moves the highlighted message number from one column to the other
Get Online Help
Accept message picks
Closes the Message Selections/Message Picks window without taking
action
Notes
To select a block of messages, move the cursor to the first message
on the block and press [CTRL][B] to mark the beginning of the
block. Then move the cursor to the last message in the block and
press
[
↵
] . The entire block will be moved to the opposite column.
If you leave the increment set to 0, the spacing between messages
will be retained. For example, renumbering message numbers 1, 3,
and 7 to message number 10 with an increment of 0 will result in
new copies with message numbers 10, 12, and 16.
Messages will be renumbered with the following condition:
•
Messages selected for renumbering appear on the Message Picks
list in the order they were selected. They do not need to be listed
in numeric order. The message with the lowest number is always
assigned the Start number, the message with the next lowest
number is assigned the first Increment number, and so on.