Rockwell Automation 2706-LSW DL40 PLUS OFFLINE PROG.SFTWR.USER MANUAL - Manual (Page 117)

7–4 Managing Message Files
Publication 2706-6.2
After you have selected the file type you want from the Select File(s)
menu, the File Selections/File Picks window opens. Listed here are
all the files in the currently selected directory that match the file type
specified. Use the up and down arrow keys to highlight a file name,
then press
[
↵
] to move the file name to the File Picks column. After
you have moved the names of all the files you want to work with into
the File Picks column, press [F10].
To select a block of file names, move the cursor to the first name on
the block and press [CTRL][B] to mark the beginning of the block.
Then move the cursor to the last file name in the block and press
[
↵
] . The entire block moves to the opposite column.
After you have moved the names of all the files you want to work
with into the File Picks column, press [F10] to accept your selection.
The File Selections/File Picks Column disappears, and the Files top
level menu reappears.
Note that you cannot copy, delete, rename, or convert files unless
you have selected at least one file name through the Select File(s)
menu. If a selection is currently in effect, you will see the small File
Picks window in the upper left corner of the screen listing the current
selections. The File Picks window appears only if you have selected
one or more files.
File Selections/File Picks window
File Selections/File Picks
Window