Rockwell Automation 2706-LSW DL40 PLUS OFFLINE PROG.SFTWR.USER MANUAL User Manual
Page 83
![background image](/manuals/580652/83/background.png)
4–41
Creating Message Files
Publication 2706-6.2
Communications via RS–485
Test Message Selections (for RS-485 communications)
If communicating via RS-485, the Address Selections window
opens. Select the DL40 address; then press
[
↵
]
.
If you need to
change your computer’s communications port parameters, highlight
Configure Port, and press
[
↵
]
. Select COM1 or COM2; press
[
↵
]
.
The
Configure Port window opens. Set Computer Address and
Baud Rate. Note: To change Parity or Data Bits, return to Ports
menu.
Highlight Download (filename) and press
[
↵
]
. After file is
downloaded, you will return to the Verify window. Highlight Test
Message(s) on DL40; press
[
↵
]
.
The Message Selections window opens. Highlight number of the
message you want to display and press
[
↵
]
.
Answer Yes to Start
Testing Messages Now? Message is displayed on DL40.
Press
[ESC] to end an Autorepeat message.