Setup menu – Rockwell Automation 2706-LSW DL40 PLUS OFFLINE PROG.SFTWR.USER MANUAL User Manual
Page 39
3–4
Navigating the Software
Publication 2706-6.2
Use the Setup menu to match the software to your color or
monochrome monitor, and to set the date and time. Access the Setup
menu by using the right and left arrow keys to move to Setup and
pressing
[
↵
]
,
or by pressing [S] at the Main menu.
Setup Menu
Configuring the Program to Match Your Monitor
The Offline Programming Software supports both color and
monochrome displays. To change the display type, move the cursor
to Setup on the Main menu and press
[
↵
].
Select Colors, and then
select either Color or Monochrome. Select Yes to confirm your
choice, then press
[
↵
]
. A message appears in the center of the screen
to indicate that the software is saving your selection to its setup file.
Press [Q] or [ESC] repeatedly to return to the Main menu.
Setup→Colors Screen
Setup Menu