Rockwell Automation 2706-LSW DL40 PLUS OFFLINE PROG.SFTWR.USER MANUAL - Manual (Page 97)

5–10 Downloading/Uploading Message Files
Publication 2706-6.2
You can upload one file at a time from the DL40 to the Offline
Programming Software. When you select Upload to DL40 (Remote
I/O), the Upload (Remote I/O) window appears.
Upload via Remote I/O screen
Included in this window are the address parameters of the currently
selected communication (.UDU) file, including DL40 Rack
(address), DL40 Group (number), and PLC Address. In addition, the
window includes the Upload File item and menu choices allowing
you to modify an existing Communication File or create a new one.
Note: There is no default Communication File. You must create at
least one file to upload or download over Remote I/O via DH+ or
Ethernet PassThrough.
When the settings on the Upload (Remote I/O) screen are as you
want, move the cursor to the Upload File line and press
[
↵
].
Answer Yes when asked if you want to start uploading now. Before
you upload, one of the following warnings is displayed, depending
on the type and access settings of your DH+ hardware device.
Uploading a File using
Remote I/O (PassThrough)