Rockwell Automation 1797-IRT8 FLEX Ex Thermocouple/RTD/mV Input Module User Manual - Manual (Page 37)

Publication 1797-6.5.2 - February 2001
How to Install Your FLEX Ex Thermocouple/RTD/mV Module 3-13
Grounding the Module All I/O wiring must use shielded wire. Shields must be terminated
external to the module, such as bus bars and shield-terminating feed
throughs.
Chapter Summary In this chapter, we told you how to install your thermocouple/RTD/
mV module in an existing programmable controller system and how
to wire to the terminal base units.
Move to chapter 3 to learn about input, output and configuration files
for the thermocouple/RTD/mV module on ControlNet.
30820-M