Brother MFC-730 - Manual (Page 109)

97
C O P Y O P E R A T I O N S
Selecting a Single Colour (One Colour)
For black and white originals, you can select a single colour, instead of
black, as the default to be used when you press
Mono Copy . OFF is the
setting for Black.
1 Press Menu , 3 , 7 .
2 Press or to select a copy colour: The options are OFF, RED,
GREEN, BLUE, CYAN, MAGENTA, and YELLOW.
3 When the screen displays your selection, press Set .
4 Press Stop to exit.
Memory Full Message
If the memory becomes full while you’re making copies, the screen
displays
MEMORY FULL P.02
ONLINE
followed by
COPY TO COPY
ONLINE
STOP TO ABORT
ONLINE
If you were scanning the first page of your document, press Stop to
cancel the job and restart to make a single copy. If you were scanning a
subsequent page, press
Mono Copy or Colour Copy to print the pages
already scanned—OR—Press Stop to cancel.
You’ll need to clear some fax or voice messages to make some additional
memory available before you can continue.
To gain extra memory, you can erase any of the following types of
messages:
• To erase incoming messages (ICMs) and memos. See Erasing
Messages in chap. 12. (Only for MFC-740)
• To print fax message stored in memory. See Printing a Fax
Message in chap. 12. (Only for MFC-740)