Brother MFC-730 - Manual (Page 156)

144
C H A P T E R S I X T E E N
Installing the MFC-740 Maintenance Utility for
DOS
Before you install the program, make sure you have the following
hardware and software to install the program:
DOS Version 3.3 or later
Monitor EGA/VGA or compatible
Option Mouse; the mouse driver must be installed.
(You can also operate the program with the keyboard.)
Follow these steps to install the remote printer console program:
1 Make sure your machine is connected to your computer and it is set
to Online.
2 Start you computer and go to the DOS prompt. If you are in
Windows
® , exit and return to the DOS prompt.
3 Insert the Brother CD-ROM into your CD-ROM drive (substitute
your appropriate drive letter for “X”).
4 At the DOS prompt (C:\>) type X: (X is the letter of your CD-ROM
drive) and press Enter.
c:\X:
5 Type CD DOS\INKJECT and press Enter.
X:\>CD DOS\INKJET
6 Type DOSETUP.EXE and press Enter.
X:\DOS\INKJET>DOSETUP.EXE
7 Follow the instructions from the installer.
Using the MFC-740 Maintenance Utility for
DOS
1 Select the directory you have chosen when you installed the program
by typing:
C:\>CD directory name