Brother MFC-730 - Manual (Page 49)

37
I N I T I A L S E T U P
As an example, your MFC is installed in the United Kingdom, is to be
used for both fax and voice calls, and your national telephone number is
0161-444 5555, then you must set the fax and telephone number parts of
your station ID as: +44 161-444 5555
1 Press Menu , 1 , 1 , 3 . The screen prompts you to enter your fax
number.
FAX:
2 Enter your fax number (up to 20 digits). The screen displays your
entry.
3 Press Set . The screen prompts you to enter your telephone number.
TEL:
4 Enter your telephone number (up to 20 digits). If your telephone
number and fax number are the same, enter the same number again.
The screen displays your entry.
5 Press Set . The screen prompts you to enter your name or your
company name.
NAME:
6 Use the dial pad to enter your name (up to 20 characters). (You can
use the following chart to help you enter letters.)
7 Press Set to confirm.
8 Press Stop . The screen returns to the date and time.
■ The telephone number you entered is used only for the Call Back
Message and Cover Page features.
■ If you do not enter a fax number, no additional information can be
entered.
■ To enter a space, press once between numbers and twice between
characters.
■ If your Station ID has already been programmed, the screen prompts
“1” to make a change, or “2” to exit without changing.
See
“Entering
Text”
in this
chapter