Brother MFC-730 - Manual (Page 83)

71
S E T U P S E N D
5 Enter a four-digit number, and press Set .
1.DOC 2.MEMORY
6 Press 1 to select DOC if you want your MFC to scan the printed
document as it is polled ––OR–– Press 2 to select MEMORY.
7 Press 1 if you want to select additional settings. The display returns
to the SETUP SEND menu ––OR–– Press 2 if you are finished
choosing settings and go to Step 8.
8 Press Start and wait for the fax to be polled.
You can use Secure Polling only with another Brother fax machine.
Cancelling a Job While Scanning the
Document
You can cancel a job while you are scanning it into memory by pressing
Stop . Eject the document by pressing Stop again.
Checking Job Status
You can check which jobs are in memory waiting to be sent. Press
Menu , 1 , 4 to check it. While the MFC is sending or receiving a fax,
press Stop . The screen display job numbers. Press or to see them.
Cancelling a Scheduled Job in Memory
You can cancel tasks you’ve scheduled, such as Delayed Fax, Delayed
Polling Receive or Polling Transmit.
If the MFC is idle,
1 Press Menu , 1 , 4 .
Any waiting jobs appear on the display. If nothing is waiting, the
screen displays NO JOB WAITING.
4.REMAINING JOBS