Brother MFC-730 - Manual (Page 55)

43
Basic Receiving Operations
Select Answer Mode
Answer Mode For
( means light off. means light on.)
1. Manual You must answer all calls yourself. If you
hear fax tones, press
Start to begin
receiving the fax, then hang up.
2. Fax The MFC automatically answers every call
as a fax call. You cannot receive a voice
call, but you can dial out and make a voice
call.
3. Fax/Tel The MFC automatically answers every
call. If the call is a fax, it prints the fax. If
the call is not a fax, it signals you with a
F/T pseudo-ring, different from the phone
company ringing, to alert you to pick up
the call. If you select this setting, you’ll
need to set the Ring Delay and F/T Ring
Time features (on the following pages).
You cannot have an answering machine on
the same line, even if it is on a separate
jack on the same line.
6
C H A P T E R S I X
Setup
Receive
See
“Fax/Tel
Mode Only”
in this
chapter
TAD
FAX
F/T
TAD
FAX
F/T
TAD
FAX
F/T