Brother MFC-730 - Manual (Page 119)

107
M E S S A G E M A N A G E R ( O N L Y F O R M F C - 7 4 0 )
When Toll Saver is ON, it overrides your Ring Delay setting. Toll Saver
must be OFF for the MFC to operate using your Ring Delay setting.
1 Press Menu , 1 , 2 , 1 .
2 Press or to select TOLL SAVER (or RING DELAY).
3 Press Set when the screen displays your selection.
4 Press or to select ON (or OFF).
5 Press Set .
6 Press Stop to exit.
ICM Recording Monitor (Call Screening)
This feature lets you turn OFF (or ON) the speaker volume for voice
messages. When you turn the monitor OFF, you will not hear messages
as they come in.
1 Press Menu , 1 , 8 , 5 .
2 Use or to select OFF (or ON).
3 Press Set when the screen displays your selection.
4 Press Stop to exit.
Recording a Memo
A memo is stored and played as a voice message.
1 Press Record .
2 When the display prompts you to pick up the handset, speak into the
handset to record your memo. Your recording can be as long as the
Incoming Message Maximum Time (
Menu , 1 , 8 , 4 ).
3 Press Stop or replace the handset when you’re finished.
Recording a Conversation
You can record a telephone conversation by pressing Record during the
conversation. Your recording can be as long as the Incoming Message
Maximum Time. You and the other party will hear a beep every 15
seconds while recording. You cannot record a conversation using the
Speaker Phone.