Brother MFC-730 - Manual (Page 116)

104
C H A P T E R T W E L V E
Playing Voice Messages and Memos
Follow the steps below to listen to voice messages and memos.
1 Press Play . Adjust volume by pressing or .
All new messages and memos are played in the order they were
recorded. The display shows the number of the current message, and
the total number of messages.
If Caller ID information was received, the MFC beeps during the
message and displays the Caller ID information for one second.
During playback, the screen displays the time and date the message
was recorded.
2 Press at the end of the message to repeat a message. Use to
skip to the next message. You can press and repeatedly until
you reach the message you want to play.
3 Press Stop to exit.
Printing a Fax Message
Once you print a new fax message stored in memory, it is erased from
the memory automatically.
1 Press Play . After two seconds, the MFC begins to play voice
messages.
2 After playing voice messages, the display asks if you want to print
fax messages that are in the memory. There is no display if there are
no faxes.
PRINT DOC?
1.YES 2.NO
3 To print the fax messages, press 1 .
––OR––
Press 2 to exit without printing.