Brother MFC-730 - Manual (Page 76)

64
C H A P T E R S E V E N
5 Press Set .
6 Press or to view the comment selections.
7 Press Set when the screen displays your selection.
8 Enter two digits to indicate the number of pages you are sending.
(Enter 00 to leave the number of pages blank.) If you make a
mistake, press
to back up and re-enter the number of pages.
9 Press Set . The screen displays
10 Press 1 if you want to select additional settings. The display returns
to the SETUP SEND menu ––OR–– Press 2 if you are finished
choosing settings, and go to Step 11.
11 Enter the fax number .
12 Press Start .
Always Send Cover Page
Make sure Station ID is set up (chap. 5). This feature does not work
without the Station ID.
You can set the MFC to send a cover page whenever you send a fax. The
number of pages in your fax is not included when you use this setting.
1 Press Menu , 1 , 3 , 1 .
2 Press or to select.
COVERPAGE:OFF
COVERPAGE:ON
3 Press Set when the screen displays COVERPAGE:ON. (If you
select ON, a coverpage is always sent when you send a fax.)
4 If you selected ON, the screen displays the cover page comment
options. Press
or to view comment selections.
5 Press Set when the screen displays your selection. The screen
displays.
6 Press 1 if you want to select additional settings. The display returns
to the SETUP SEND menu ––OR–– Press 2 to exit if you are
finished choosing settings.