Setting pc interface mode – Brother MFC-730 User Manual
Page 70
58
C H A P T E R S I X
4
If you selected STANDARD, the screen prompts you to enter the fax
number you want to poll, and then to press
Start
.
ENTER FAX NO.
ONLINE
THEN PRESS START
ONLINE
•
If you selected SECURE, enter a four-digit number and press
Set
.
•
If you selected TIMER, enter the time (in 24-hour format) you
want to begin polling and press
Set
.
5
Specify the destination fax machines, which you wish to poll by
using One Touch, Speed Dial, a Group, Tel-Index or the dial pad.
You must press
Help/Broadcast
between each location.
6
Press
Start
.
Your MFC polls each number or group number in turn for a
document.
DIALLING
Setting PC Interface Mode
If you connect your MFC to your PC, you can receive faxes into your
PC. After completing all setup for Multi-Function Link Pro for Fax, you
can select PC Interface Mode (ON/OFF) for routing incoming faxes.
1
Press
Menu
,
1
,
2
,
8
.
8.PC INTERFACE
2
Press
or
to select ON or OFF.
3
Press
Set
when the screen displays your selection.
4
Press
Stop
to exit.