Brother MFC-730 - Manual (Page 84)

72
C H A P T E R S E V E N
2 If you have more than two jobs waiting, use or to select the
job you want to cancel. Press Set when the screen displays your
selection.
—OR—
If you have only one job waiting, go to step 3.
#02 SALES REPORT
1.CLEAR 2.QUIT
3 Press 1 to cancel —OR— Press 2 to exit without cancelling.
To cancel another job, return to step 2.
4 Press Stop to exit.
If the MFC is busy, press Stop , then follow Steps 2 through 4 to cancel a
job.
You can check which jobs are remaining in memory by following Steps 1
and 2 above.
Interrupting Delayed Fax and Polling Transmit
Jobs
You can send a fax or make a copy without cancelling the Timer or Poll
Waiting with documents in the feeder by “interrupting” it. When you
interrupt the Timer to send a “new” set of documents, the MFC will not
automatically redial the number if it was busy. Also, you cannot use the
function mode if you have interrupted the Timer or Poll Waiting.
1 Press Menu , 1 , 5 .
2 Wait 2 seconds, then remove the documents that are waiting in the
feeder.
INSERT DOCUMENT
3 Place the “new” document you want to send now in the feeder.
4 Enter the new fax number for the documents you want to send now.
5 Press Start .
6 After the transmission is finished, place the “old” documents back
into the feeder.
7 Press Menu , 1 , 5 , to restore the Delayed Fax and/or Polling timer.