Brother MFC-730 - Manual (Page 71)

Before You Begin
■ Documents must be between 7.0 and 21.6 cm wide, and 12.7 and
35.6 cm long. Your MFC can only scan an image 20.8 cm wide,
regardless of how wide the paper is.
■ Make sure you insert documents face down, top edge first.
■ Adjust the paper guides to fit the width of your document.
Paper Guides
■ The automatic document feeder (ADF) can hold up to 20 pages,
feeding each one individually through the MFC. Use standard (75 g/
m
2 ) paper when using the ADF; if you’re using heavier paper, feed
each sheet individually to prevent paper jams.
■ Press Resolution (before you send the fax) to select the resolution
for the document you’re sending.
■ DO NOT use curled, wrinkled, folded, or ripped paper, or paper with
staples, paper clips, paste or tape attached. DO NOT use cardboard,
newspaper, or fabric.
59
7
C H A P T E R S E V E N
Setup
Send
See
“Resolution”
in this
chapter