Brother MFC-730 - Manual (Page 132)

120
C H A P T E R T H I R T E E N
Reset Key
If the screen displays REMAINED DATA, you can clear data remaining
in the printer memory by pressing
On/Off Line , then pressing Reset .
Priority Key
When you press Priority , the MFC enters printer mode, and will not
print faxes on paper. Instead, faxes are stored in the memory until you
press
Priority again.
Ink Management Key
When you press Ink Management , the screen will display
1.CLEANING
2.REPLACE INK
If you are having trouble with one of the ink colors, you may need to clean
the print head. (See “Troubleshooting and Maintenance” in Chapter 20 .)
If you got an error message NEAR EMPTY XXXX or INK EMPTY
XXXX, you will need to replace the ink cartridge for the appropriate
colour. (See Troubleshooting and Maintenance in Chapter 20.)
Turning Off Bi-directional Printing
You can further improve print quality by turning off bi-directional
printing and setting the MFC to print in one direction only. However, this
will reduce print speed by one half.
1 Press Menu , 2 , 3 . The screen displays
3.BI-DIR PRINT
2 Press 2 to select OFF (or 1 to select ON).