Brother MFC-730 - Manual (Page 96)

84
C H A P T E R T E N
Change Fax Forwarding Setting
Press 9 5
then to
Turn Fax Forwarding OFF––Press 1 .
Turn Fax Forwarding ON––Press 2 .
Program Fax Forward Number––Press 4 . The MFC 730 will
automatically turn on Fax Forwarding ON.
Turn Fax Storage ON––Press 6 .
Turn Fax Storage OFF––Press 7 . (This is only possible if there are no
faxes stored in the memory, or if all faxes have been erased using
Remote Control
9 6 3 ).
Retrieve a Fax
Press 9 6
then to
Print a Memory Status List––Press 1 , then enter the number of remote
fax machine and then press # # , After the beep, hang up and wait.
Retrieve all faxes––Press 2 , then enter the number of remote fax
machine and then press # # , After the beep, hang up and wait.
Erase all fax messages––Press 3 . If the data stored in the memory has
not been printed before, it will be printed first and then erased.
Check the Receiving Status
Press 9 7
then for
Fax messages––Press 1 .
1 long beep––Received messages.
3 short beeps––No messages.
Change Answer Mode
Press 9 8
then for
TAD––Press 1 .
Fax/Tel (F/T)––Press 2 .
Fax––Press 3 .
Exit Remote Operation
Press 9 0