Brother MFC-730 - Manual (Page 56)

44
C H A P T E R S I X
4. TAD This is the only setting in which you can
use an external answering machine. Your
telephone answering device is connected to
your machine, and answers every call.
Once the external telephone answering
device (TAD) answers, the machine listens
for fax tones. If it detects fax tones, Fax
messages are printed.
The TAD setting works only with an external telephone answering
device (TAD). Ring Delay and F/T Ring Time do not work in this
setting.
4. TAD The MFC provides you with a built-in
digital Message Manager for fax and
voice. When you set the MFC to answer
calls, it will record up to 99 minutes of
messages. For more information about
Message Manager operation, please see
chap. 12.
Manual Reception (Manual Mode)
When you set the Answer Mode to manual, you must answer each
incoming call yourself. Here is what you should do when using Manual
Mode:
If You Get a... Then You Should...
1. Regular phone call Talk as you normally would.
2. Phone call and Press Start when you have finished talking
request to send a fax
NOTE:Sender must also press Start.
3. Fax tone... Press Start , and replace the handset.
Automatic Fax Only Reception (Fax Mode)
You can automatically receive all your faxes in Automatic Fax Reception
mode (
Fax light is on). Select this mode by pressing Mode .
TAD
FAX
F/T
For MFC-
730 ) (
TAD
FAX
F/T
For MFC-
740 ) (