Metrohm 916 Ti-Touch User Manual
916 ti-touch
Advertising
Table of contents
Document Outline
- Table of contents
- Table of figures
- 1 Introduction
- 2 Safety instructions
- 3 Overview of the instrument
- 4 Installation
- 4.1 Setting up the instrument
- 4.2 Connecting the power supply unit
- 4.3 Connecting the propeller stirrer
- 4.4 Connecting MSB devices
- 4.5 Connecting USB devices
- 4.6 Connecting sensors
- 4.6.1 General
- 4.6.2 Connecting a pH, metal or ion-selective electrode
- 4.6.3 Connecting a reference electrode
- 4.6.4 Connecting a polarizable electrode
- 4.6.5 Connecting a temperature sensor or an electrode with integrated temperature sensor
- 4.6.6 Connecting an iConnect
- 4.6.7 Differential potentiometry
- 4.7 Connecting the Ti-Touch to a network
- 5 Titrations
- 6 Operation
- 7 System settings
- 8 Titrants
- 9 Reagents
- 10 Sensors
- 11 Device manager
- 12 File manager
- 13 GLP manager
- 14 Common variables
- 15 Templates
- 16 Methods
- 17 Control
- 18 Favorites
- 19 Sample data
- 20 Sample table
- 21 Determination run
- 22 Live modifications
- 23 Results and more determination data
- 24 Statistics
- 25 Result table
- 26 Printing
- 27 Manual control
- 28 Parameters
- 28.1 Dynamic equivalence point titrations (DET)
- 28.2 Monotonic equivalence point titrations (MET)
- 28.3 Endpoint titrations (SET)
- 28.4 Manual titrations (MAT)
- 28.5 Measurements (MEAS)
- 28.6 Calibration of sensors (CAL)
- 28.7 Electrode test for pH electrodes (ELT)
- 28.8 Evaluations (EVAL)
- 28.9 Calculations
- 28.10 Reports (REPORT)
- 28.11 Dosing and Liquid Handling
- 28.12 Communication
- 28.13 Automation
- 28.14 Miscellaneous commands
- 29 Operation and maintenance
- 30 Troubleshooting
- 31 Appendix
- 32 Technical specifications
- 33 Warranty (guarantee)
- 34 Accessories
- Index