4 metrohm control devices – Metrohm 916 Ti-Touch User Manual

Page 110

Advertising
background image

11.4 Metrohm control devices

■■■■■■■■■■■■■■■■■■■■■■

94

■■■■■■■■

916 Ti-Touch

Entry

x.x.x.x

Default value

empty

MAC address

Unambiguous address of the network adaptor for identification within a
network. This parameter cannot be edited.

NetBIOS name

Unambiguous designation of the device within the network. This parame-
ter cannot be edited.

11.4

Metrohm control devices

The following Metrohm devices can be used as control devices:

■

Ti-Touch Titrator (permanently entered as control device in the device
manager)

■

USB Sample Processors

The following specifications apply for all of the control devices mentioned
above. Additional device configurations for the USB Sample Processor are
described in a separate chapter (see Chapter 11.5, page 97).

The dialog shows the control device with its measuring inputs, the MSB
connectors and connected peripheral devices (dosing device, stirrer,
Remote Box).

[Properties]

Open the properties dialog of the highlighted entry.

The following properties can be displayed and edited to a certain extent:

■

Properties of the measuring inputs (see Chapter 11.4.1, page 95)

■

Properties of the MSB connectors (see Chapter 11.4.2, page 96)

Advertising