2 connectors, Connectors – Metrohm 916 Ti-Touch User Manual

Page 18

Advertising
background image

1.1 Instrument description

■■■■■■■■■■■■■■■■■■■■■■

2

■■■■■■■■

916 Ti-Touch

■

MET
Monotonic equivalence point titration. The reagent is added in con-
stant volume steps.
Measuring modes:

– pH (pH measurement)
– U (potentiometric voltage measurement)
– Ipol (voltametric measurement with selectable polarization cur-

rent)

– Upol (amperometric measurement with selectable polarization

voltage)

■

SET
Endpoint titration at one or two specified endpoints.
Measuring modes:

– pH (pH measurement)
– U (potentiometric voltage measurement)
– Ipol (voltametric measurement with selectable polarization cur-

rent)

– Upol (amperometric measurement with selectable polarization

voltage)

■

MEAS
Measuring modes:

– pH (pH measurement)
– U (potentiometric voltage measurement)
– Ipol (voltametric measurement with selectable polarization cur-

rent)

– Upol (amperometric measurement with selectable polarization

voltage)

– T (temperature measurement)

■

CAL
pH electrode calibration.
Measuring mode:

– pH (calibration of pH electrodes)
– ELT (Electrode test for pH electrodes)

1.1.2

Connectors

The 916 Ti-Touch is equipped with the following connectors:

■

Mains connection
For connecting to the mains supply with the aid of the power supply
unit provided.

■

Two MSB connectors (Metrohm Serial Bus)
For connecting dosing devices, stirrers or a Remote Box.

■

USB connector
For connecting peripheral devices (printer, PC keyboard, etc.), a USB
Sample Processor, a USB flash drive or a USB hub.

Advertising