Metrohm 916 Ti-Touch - Manual (Page 82)

8.6 GLP test for exchange unit and dosing unit
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
66 ￭￭￭￭￭￭￭￭
916 Ti-Touch
1
2
3
Figure 18 Exchange unit – tubing connections
1 Tubing to the reagent bottle 2 Tubing to the dosing tip
3 Tubing to the dosing cylinder
8.6 GLP test for exchange unit and dosing unit
Titrant: Edit ▶ Dosing unit / Exchange unit ▶ GLP test
In the dialog Exchange unit / GLP test or Dosing unit / GLP test,
respectively, you can define the time interval after which a GLP test must
be carried out again for the exchange unit or dosing unit.
GLP test date
Date on which the last GLP test was carried out.
Format: YYYY:MM:DD
Monitoring
on | off (Default value: off)
If this parameter is activated, then the time interval after which a GLP test
has to be carried out again will be monitored.