Metrohm 916 Ti-Touch - Manual (Page 266)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
250 ￭￭￭￭￭￭￭￭
916 Ti-Touch
27 Manual control
The following functions are available in the manual control:
[Measure]
Carrying out manual measurements (see Chapter 27.2, page 252).
Measuring modes:
￭ pH (potentiometric pH measurement)
￭ U (potentiometric voltage measurement)
￭ Ipol (voltametric measurement with selectable polarization current)
￭ Upol (amperometric measurement with selectable polarization voltage)
￭ T (temperature measurement)
[Dosing]
Dosing manually (see Chapter 27.3, page 254).
The following dosing functions are available:
￭ Preparing the exchange or dosing unit
￭ Emptying the dosing unit
￭ Filling the dosing cylinder of the exchange / dosing unit
￭ Dosing a specified volume
￭ Dosing continuously
[Stir]
Controlling the stirrer manually (see Chapter 27.4, page 263).
[Remote]
Scanning the input lines on the remote interface and setting the output
lines (see Chapter 27.5, page 265).