Metrohm 916 Ti-Touch - Manual (Page 136)

11.9 USB/RS-232 adapter
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
120 ￭￭￭￭￭￭￭￭
916 Ti-Touch
11.9 USB/RS-232 adapter
List of devices: USB/RS-232 adapter ▶ Edit ▶ COM interface ▶ Edit
As a rule, balances are equipped with a serial RS-232 interface. To con-
nect a balance, you will require the 6.2148.050 cable. You can adjust the
interface parameters in the dialog Edit device / Port parameters. These
settings must match the settings on the connected device.
NOTE
If you make changes to parameter settings in this dialog, then you must
switch the Ti-Touch off and back on in order for the changes to take
effect.
Baud rate
Transfer rate in characters per second.
Selection 1200 | 2400 | 4800 | 9600 | 19200 | 38400 |
57600 | 115200
Default value 9600
Data bits
Number of data bits.
Selection 7 | 8
Default value 8
Parity
Type of parity testing.