Banner SureCross DX80 Wireless Networks - Manual (Page 31)

31
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
SureCross Wireless Network
Product Manual
Advanced Setup
DX80
1 2
www.bannerengineering.com
GATEWAY
900MHz
Ethernet Communications
The DX80 wireless systems are configured using an Ethernet network connection and a common Web page browser. An Ethernet connection
can be established from a DX80 GatewayPro device or a DX83 Ethernet Bridge device serially connected to the DX80 Gateway.
The Ethernet Bridge and GatewayPro each ship with an Ethernet crossover cable. One end of the cable is a RJ45 connector and the other end
is an industrial Ethernet connector. This cable is designed to be connected directly to a computer. For a list of the accessories, please refer to
the Accessories and Replacements parts section.
For more examples of system layouts, please refer to DX80 System Layouts, Banner document p/n
133601 .
Power
Host system
DX80
GatewayPro
Industrial Ethernet
Connection
Modbus TCP or
EtherNet IP
Ethernet
Crossover Cable
DX80
1 2
www.bannerengineering.com
GATEWAY
Pro
900MHz
Host system
DX80
1 2
www.bannerengineering.com
GATEWAY
Pro
900MHz
Modbus TCP or
EtherNet IP
Ethernet
Crossover Cable
Modbus RTU
Splitter cable
DX83 Ethernet
Bridge
DX80
Gateway