Banner SureCross DX80 Wireless Networks - Manual (Page 32)

32
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
SureCross Wireless Network
Product Manual
Advanced Setup
Web Page Access
Browser settings
The Web pages are served from the DX83 Ethernet Bridge or DX80 GatewayPro device. Internet browsers such as Internet Explorer, Netscape
Navigator, or Mozilla Firefox can access the Web pages.
Set up the browser for a direct connection to the Internet. If you are experiencing problems connecting, verify the browser is not set to use a
proxy server (see Appendix A for proxy settings.) Note also that a crossover Ethernet cable is required when connecting directly from a host
computer to the DX83 Ethernet Bridge or DX80 GatewayPro.
Network Setup
Default IP address / Host Network Settings:
The factory default IP address for the DX83 Ethernet Bridge or DX80 GatewayPro devices is:
192.168.0.1
To change the default IP address, set up the host PC with an IP address different from the Ethernet Bridge or GatewayPro IP addresses.* For
example, change the PC host IP address to:
Host IP address: 192.168.0.2
Open a Web browser and log into the Ethernet Bridge or GatewayPro by typing the IP address in the browser location window.
http://192.168.0.1
Enter the following as the user name and password.
User name: system
Password: admin
The Web home page for the Ethernet Bridge or GatewayPro displays. To log in, click on any tab at the top of the page.