Banner SureCross DX80 Wireless Networks - Manual (Page 55)

55
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
SureCross Wireless Network
Product Manual
Sensor Connections
DOx
GND
SureCross Device
Wiring diagram for a sourcing (PNP) two-
wire output load powered using the DX80
device terminal block.
Digital Sensors, Sourcing (PNP) Outputs
Neither the inputs nor the outputs on the DX80 devices are isolated. Under certain operating conditions, externally powered sensors may need
to have ground in common with the DX80 device to which they are connected. The power sources do not have to be the same.
Powered by DX80
Powered Externally
Two-Wire Three-Wire
PWR
DOx
GND
SureCross Device
Wiring diagram for a sourcing (PNP) three-
wire output load powered using the DX80
device terminal block.
dc common
DOx
external
power
SureCross Device
Wiring diagram for a sourcing (PNP) three-
wire output load powered from outside the
DX80 device. Under certain conditions, the
dc commons between the sensor and the
DX80 might need to be connected.
DIx
external
power
SureCross Device
Wiring diagram for a sourcing (PNP) two-
wire output load powered from outside the
DX80 device. Under certain conditions, the
dc commons between the sensor and the
DX80 might need to be connected.