Banner SureCross DX80 Wireless Networks - Manual (Page 88)

88
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
SureCross Wireless Network
Product Manual
Accessories
FlexPower™ Sensors
Part No Model No Description
78447 SM312LPQD-78447 MINI-BEAM, Low Power, 5V, Polarized
Retroreflective, 3 m
78419 SM312DQD-78419 MINI-BEAM, Low Power, 5V, Diffuse,
38 cm
Part No Model No Description
79610 M12FTH1Q Temperature and Humidity Sensor, ±2%
Accuracy, 1-wire serial interface
81050 M12FTH2Q Temperature and Humidity Sensor, ±3.5%
Accuracy, 1-wire serial interface
Banner Part No: 75390
Model No: QT50ULBQ6-75390
Description: Ultra-Sonic, QT50U, 200 mm to 8 m Range
Banner Part No: 10710 (Emitter), 10711 (Receiver)
Model No: QS30WEQ (Emitter), QS30WRQ (Receiver)
Description: WORLD-BEAM, QS30, Range up to 100 feet
Banner Humidity Sensor Calibration Statement . This calibration statement (also
available online) lists the chain with which the calibration of Banner humidity
sensors is traceable to NIST standards.
Other Sensors or Sensor Components
Part No Model No Description
10406 BWA-THERMISTOR-001 NTC Thermistor, 2 KOhms, +/-0.2%C
81930 FTH-FIL-001 Temperature and Humidity Sensor Filter, Aluminum Grill Filter Cap (default filter cap)
81931 FTH-FIL-002 Temperature and Humidity Sensor Filter, Stainless Steel Sintered Filter, 10 micrometer porosity
14275 BWA-S612-30-100 NoShok Series 612 Submersible Level Transmitter, model 612-30-1-1-N-100, 0 to 30 psig, 100’ cable
14276 BWA-S612-15-100 NoShok Series 612 Submersible Level Transmitter, model 612-15-1-1-N-100, 0 to 15 psig, 100’ cable
12433 BWA-ACC-SEN-SDI Acclima SDI-12 Soil Moisture Transducer