Great Plains 2510HDP Operator Manual - Manual (Page 128)

124 1510HDP/2010HDP/2510HDP Table of Contents Index Great Plains Manufacturing, Inc.
118-245M Table of Contents Index 2013-10-21
If the sensor is compatible, these cables share the signal between your existing tractor systems and the monitor.
Hydraulic Meter Drive
This option provides direct and precise tractor cab
control of main box seed rate.
It replaces the ground drive Range and Transmission
chains with a hydraulic motor, motor controller and cab
console. The ground drive assemblies are left in place,
and are upgraded with speed sensors and a brake to
prevent freewheeling.
The hydraulic drive is dealer or field installed.
There are two models available. The “MT” (Min Till)
model is for drills hitched directly to tractors. The “NT”
(No Till) model includes longer hydraulic hoses, and is
intended for drills using accessory hitches.
Small Seeds and/or Fertilizer options are not presently
supported when a hydraulic drive is installed.
The hydraulic drive includes its own wheel-mounted
speed sensor, and does not use any radar installed. The
speed sensor included with the hydraulic drive is not
shared with the optional Seed Monitor.
For installation and use, see “Hydraulic Drive
Operation” starting on page 68.
Part Numbers Comment
115-0159-432 TRW radar, Case IH
115-0159-519 DICKEY-john or Magnavox radar, John Deere 1990 or later
115-0159-518 DICKEY-john radar, Cat Challenger (Model 65 & 75)
115-0159-517 DICKEY-john radar, Case IH
115-0159-529 DICKEY-john radar, Ford/White
115-0159-627 DICKEY-john radar, Cat Challenger (Model 65C, 75C-Mod, D-Mod Row Crop 35,45,55)
115-0159-700 DICKEY-john or Magnavox radar, John Deere 7000/8000/9000 Series (2WD or MFWD)
117-0159-462 Magnavox radar, other than John Deere
117-0159-463 TRW radar, other than Case IH
Description Part Number
VERIS VARI-RATE NO-TIL 120-296A
15P-20P-24P VERIS VARI-RATE MT 120-297A
19977
19974
19972