Great Plains 2510HDP Operator Manual - Manual (Page 92)

88 1510HDP/2010HDP/2510HDP Table of Contents Index Great Plains Manufacturing, Inc.
118-245M Table of Contents Index 2013-10-21
Varying Rates with Pre-set Function
The Great Plains Precision Population Controller allows
you to pre-set three different rates, and then change
rates on-the-go by toggling from one rate to another
rates with the Up or Down arrow keys.
Refer to Figure 99
1.
To enter the three pre-set rates, press Function key
until Pre-set Menu screen appears: Use Up-Down
arrow keys to toggle from manual mode to pre-set
mode.
Refer to Figure 100, Figure 101 and Figure 102
2.
Press Function key to move to the next pre-set
screen, and the Up-Down arrow keys to set the
pre-set rates.
Refer to Figure 103
3.
When in Pre-Set mode, the main operating screen
shows the pre-set rate currently being applied.
Note: When you are in Pre-set mode, the Up-Down arrow
keys only toggle between pre-set rates.
Figure 99
Preset Mode
22795
Figure 100
Preset Mode 1
22796
Figure 101
Preset Mode 2
22797
Figure 102
Preset Mode 3
22798
Figure 103
Preset Operating Mode
22799