Great Plains 2510HDP Operator Manual User Manual
Page 81
Advertising
Great Plains Manufacturing, Inc.
Hydraulic Drive Operation
77
2013-10-21
118-245M
Refer to Figure 95
7.
The display will show the error or difference between
the traveled distance and the distance calculated by
the Controller.
Refer to Figure 96
8.
If this is the first time the unit has been calibrated,
this error can be large. Accept the new speed
calibration and re-run the course. Re-calibrate until
the error is within 5%. The cab console will give you
the option each time you calibrate of accepting the
new settings, or keeping the previous settings.
Figure 95
Distance Variance
22793
Figure 96
Save/Ignore Result
22794
Advertising