Dell 3110cn Color Laser Printer - Manual (Page 138)

Printer Settings
If your printer is connected to the network, you can change the operator panel settings from your Web
browser. If you are a network administrator, you can clone the printer settings of one printer to one or all
printers on the network.
Type your network printer IP address in your Web browser. Choose Printer Settings from the topics list,
and then select the printer settings you want to change.
To copy your printer settings to another printer on the network, choose Copy Printer Settings from the
topics list, and then type the other printer's IP address.
If you do not know your printer IP address, it is specified on the printer settings page. To print a printer
settings page:
Press Menu. 1.
Press until Report/List appears, and then press . 2.
Printer Setting is displayed. Press .
The printer settings page is printed.
3.
Resetting Defaults
After executing this function and rebooting the printer, all the menu parameters, except the parameters for
the network, are reset to their default values.
Press Menu. 1.
Press until Admin Menu appears, and then press . 2.
Press until Maintenance appears, and then press . 3.
Press until Reset Defaults appears, and then press . 4.
The Are you sure? message appears on the operator panel. Press . 5.
Turn off the printer, and then on again to apply the settings. 6.
Initializing NVRAM for Network Settings
You can initialize the IP address and network-related settings by initializing NVRAM for Network settings.
Press Menu. 1.
2.
3.